Vidyo meeting at CERN

http://information-technology.web.cern.ch/services/fe/howto/users-use-h323sip-client-connect-vidyo-meeting

VidyoPortal : Client Web Vidyo

Calling-out an H323/SIP device from the CERN VidyoPortal

An H323/SIP device can be called from the Vidyo portal using its IP address: for ex. an H323/SIP device with IP 137.138.255.255 will be called by entering « 137.138.255.255 » on the vidyoportal interface after authentication in the field Select from list or Enter name to call. This will make a point to point connection from your VidyoDesktop client to the H323/SIP device.

Alternatively, for multipoint meetings, you will need to call the H323/SIP device via Control Meeting in the top right corner of the vidyoportal interface, after authentication, click in the Add Participant icon (first on the left)

Vidyo meeting  : Stations visioconf  Polycom ou Aver suivant les salles

Calling-in from an H323/SIP device to a Vidyo meeting 

Calling-in from an H323 device to Vidyo is also supported through the use of an IVR (Interactive Voice Response) service. To join a Vidyo meeting from your H323 device, simply dial the IP address of one of the gateways listed below.
Once the connection is established with the gateway, dial in the Vidyo meeting room extension you wish to join followed by the « # » key.
NOTE: To know how to send DTMF tones on your H323/SIP endpoint please refer to its user’s manual.
Vidyo gateway addresses
CERN: vidyogw06.cern.ch ( 188.184.66.56 )

Internet2 (Ann Arbor, MI, US): cern-vidyo-gateway3.internet2.edu ( 207.75.165.84 )

Finding the Vidyo meeting extension